Supervisor Password; Starting The Computer By Password - Toshiba Qosmio G10 User Manual

■
Owner String (text box)
You can use this box to associate text with the password. After you
enter text, click Apply or OK. At the time of a startup of a computer, this
text is displayed, when you can ask for the input of a password.

Supervisor password

To set a supervisor password, follow the steps below.
1. Click Start.
2. Click Run.
3. Enter the following:C:\Program Files\Toshiba\Windows
Utilities\SVPWTool\TOSPU.EXE
If you set a supervisor password, some functions might be restricted when
a user logs on with the user password.
This utility lets you do the following:
■
Register, delete or change the supervisor password.
■
Specify restrictions for general users.

Starting the computer by password

To start up the computer with the user password, follow these steps:
1. Turn on the power as described in Chapter 3,
following message appears:
S
At this point, the hotkeys Fn + F1 to F9 do not work. They will function after
you enter the password.
2. Enter the password.
3. Press Enter.
If you enter the password incorrectly three times in a row, the computer
shuts off. In this case, you must turn the computer back on to retry
password entry.
User's Manual
Password =
Getting Started. The
Power
6-15