Chicago Electric 97907 Set Up And Operating Instructions Manual page 13

Maintenance anD
servicing
Procedures not specifically
explained in this manual
must be performed only by a
qualified technician.
FrOM acciDental
OperatiOn:
turn the power switch of the
tool to its "OFF" position and
unplug the tool from its
electrical outlet before
performing any inspection,
maintenance, or cleaning
procedures.
tO prevent seriOus
injury FrOM tOOl
Failure:
Do not use damaged
equipment. if abnormal noise
or vibration occurs, have the
problem corrected before
further use.
cleaning, Maintenance, and
lubrication
1. BeFOre eacH use,
general condition of the tool. Check
for loose screws, misalignment or
binding of moving parts, cracked or
broken parts, damaged electrical wir-
ing, and any other condition that may
affect its safe operation.
aFter use,
2.
of the tool with clean cloth.
3. To prevent shock, never allow any
liquids to enter the air ports of the tool
housing.
SKU 97907
tO prevent
seriOus injury
inspect the
clean external surfaces
For technical questions, please call 1-800-444-3353.
4. If the Carbon Brushes are damaged
or worn, they must be replaced by a
qualified service technician.
5. Warning! if the supply cord of
this power tool is damaged, it must
be replaced only by a qualified
service technician.
Page 13