Chicago Electric 93632 Set Up And Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Chicago Electric Manuals
  4. Drill
  5. 93632
  6. Set up and operating instructions manual

Chicago Electric 93632 Set Up And Operating Instructions Manual

1/2” heavy-duty low speed vsr drill
Hide thumbs Also See for 93632:
Table of Contents

Advertisement

Quick Links

1/2" Heavy-duty Low
Set up and opeRating inStRuctionS
visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
Save tHiS ManuaL.
Copyright
2006 by Harbor Freight Tools
©
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Manual Revised 09a, 09l
Speed vSR dRiLL
Model
. All rights reserved. No portion of this manual or any artwork
®
93632

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 93632 and is the answer not in the manual?

Questions and answers

Related Manuals for Chicago Electric 93632

Summary of Contents for Chicago Electric 93632

  • Page 1 1/2” Heavy-duty Low Speed vSR dRiLL Model 93632 Set up and opeRating inStRuctionS visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious injury. Save tHiS ManuaL. Copyright 2006 by Harbor Freight Tools .

  • Page 2: Important Safety Information

    There is an injury. increased risk of electric shock if your body is grounded. notice is used to address practices not related to personal injury. Page 2 For technical questions, please call 1-800-444-3353. SKU 93632...
  • Page 3 Trigger or energizing power tools that source and/or the battery pack from have the Trigger on invites accidents. the power tool before making any ad- justments, changing accessories, or SKU 93632 For technical questions, please call 1-800-444-3353. Page 3...

  • Page 4: Drill Safety Warnings

    Hold power tools by insulated grip- should: ping surfaces when performing an • Avoid operating alone. operation where the cutting tool may • Do not use with Trigger locked on. Page 4 For technical questions, please call 1-800-444-3353. SKU 93632...

  • Page 5: Vibration Safety

    If any sense and caution are factors which can- not be built into this product, but must be supplied by the operator. SKU 93632 For technical questions, please call 1-800-444-3353. Page 5...

  • Page 6: Grounded Tools: Tools With Three Prong Plugs

    Association, and the National Elec- have a three wire cord and three prong trical Code. grounding plug. The plug must be con- (See outlets for 2-prong plug.) nected to a properly grounded outlet. If Page 6 For technical questions, please call 1-800-444-3353. SKU 93632...

  • Page 7: Extension Cords

    Make sure the extension cord is properly wired and in good electrical condition. Always replace a damaged extension cord or have it repaired by a qualified electrician before using it. SKU 93632 For technical questions, please call 1-800-444-3353. Page 7...

  • Page 8: Specifications

    Freight Tools at the number shown on the 1/2” Mild Steel cover of this manual as soon as possible. Chuck 1/2” Capacity, Keyed Chuck Spindle 1/2” 20 UNF 39LH e194601 Rev 09l Page 8 For technical questions, please call 1-800-444-3353. SKU 93632...

  • Page 9: Instructions For Putting Into Use

    (not included) tighten the Screw (14) until tight. note: Periodically check to be sure the handles remain tight. Do not reposition the handles while the tool is running or plugged in. SKU 93632 For technical questions, please call 1-800-444-3353. Page 9...

  • Page 10: Installing Drill Bits

    Make sure the bit is still centered in the Chuck. Insert the tip of the Chuck Key into one of the openings drilled into the side of the Chuck. Engage the gears of the Chuck Page 10 For technical questions, please call 1-800-444-3353. SKU 93632...

  • Page 11: General Operating Instructions

    When the hole has been drilled, remove the bit from the hole, release the Trigger and trigger lock. Unplug the tool and store it in a safe place. SKU 93632 For technical questions, please call 1-800-444-3353. Page 11...

  • Page 12: Maintenance And Inspection

    Clean the tool after each use, and store it properly. Keep it out of reach of children and other unauthorized persons. Protect it from moisture and corrosive materials. Page 12 For technical questions, please call 1-800-444-3353. SKU 93632...

  • Page 13: Troubleshooting

    Solution: Unplug tool from power supply. Loosen drill bit in chuck, and reinstall carefully. Tighten securely. Possible cause: Chuck is loose on Spindle (12). Solution: Tighten the Chuck onto the Spindle by turning clockwise. SKU 93632 For technical questions, please call 1-800-444-3353. Page 13...

  • Page 14: Parts List

    If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Page 14 For technical questions, please call 1-800-444-3353. SKU 93632...

  • Page 15: Assembly Drawing

    SKU 93632 For technical questions, please call 1-800-444-3353. Page 15...

  • Page 16: Limited 90-Day Warranty

    Camarillo, CA 93011 • (800) 444-3353 not apply to you. THIS WARRANTY IS exPReSSLy IN LIeU of ALL oTheR WARRANTIeS, exPReSS oR IMPLIeD, INCLUDINg The WARRANTIeS of MeRChANTAbILITy AND fITNeSS. Page 16 For technical questions, please call 1-800-444-3353. SKU 93632...

Table of Contents