Chicago Electric 98179 Owner's Manual & Safety Instructions

Chicago Electric 98179 Owner's Manual & Safety Instructions

3/8'' heavy duty professional magnesium drill

Advertisement

Quick Links

Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
3/8" HEAVY DUTY
PROFESSIONAL
MAGNESIUM DRILL
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2008 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
17f
98179

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 98179 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Chicago Electric 98179

  • Page 1 Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. 98179 3/8" HEAVY DUTY PROFESSIONAL MAGNESIUM DRILL Visit our website at: http://www.harborfreight.com...
  • Page 2: General Power Tool Safety Warnings

    Keep work area clean and well lit. medication. A moment of inattention while Cluttered or dark areas invite accidents. Item 98179 For technical questions, please call 1-888-866-5797. Page 2...
  • Page 3: Drill And Impact Drill Safety Warnings

    The correct power tool will do the job Use auxiliary handles supplied with the better and safer at the rate for which it was tool. Loss of control can cause personal designed. injury. Item 98179 For technical questions, please call 1-888-866-5797. Page 3...
  • Page 4: Vibration Safety

    If any abnormal cover all possible conditions and situations vibration occurs, stop use immediately. that may occur. It must be understood SAVE THESE INSTRUCTIONS. Item 98179 For technical questions, please call 1-888-866-5797. Page 4...
  • Page 5: Grounded Tools: Tools With Three Prong Plugs

    (See Table A.) The smaller the gauge electrically “live” terminal. (See 3-Prong number of the wire, the greater the capacity Plug and Outlet.) of the cord. For example, a 14 gauge cord Item 98179 For technical questions, please call 1-888-866-5797. Page 5...
  • Page 6 Protect the extension cords from sharp objects, excessive heat, and damp or wet Underwriters Laboratories, Inc. areas. Volts Alternating Current Amperes No Load Revolutions per Minute n 0 xxxx/min. (RPM) Item 98179 For technical questions, please call 1-888-866-5797. Page 6...
  • Page 7 Chuck (2) with one hand while turning the front clamps (not included) to prevent movement ring with the other. Open the jaws enough to while working. allow the bit to slide in. Turn the front ring the Item 98179 For technical questions, please call 1-888-866-5797. Page 7...
  • Page 8: Metal Drilling

    Too much pressure will moving during the drilling operation. not help the process and will cause the bit to overheat, may cause the bit to bend or Item 98179 For technical questions, please call 1-888-866-5797. Page 8...
  • Page 9: Cleaning, Maintenance, And Lubrication

    2. Tighten chuck, then operate tool in reverse to back bit out of work piece. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. Item 98179 For technical questions, please call 1-888-866-5797. Page 9...
  • Page 10 Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Item 98179 For technical questions, please call 1-888-866-5797. Page 10...
  • Page 11 Assembly Diagram Item 98179 For technical questions, please call 1-888-866-5797. Page 11...
  • Page 12: Please Read The Following Carefully

    This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • 1-888-866-5797 Item 98179 For technical questions, please call 1-888-866-5797. Page 12...

Table of Contents