Table of Contents
Advertisement
Quick Links
10.8 VOLT CORDLESS DRILL/DRIVER
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
Distributed exclusively by Harbor Freight Tools
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SaVe THiS manual.
Copyright
©
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
Model
OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
2007 by Harbor Freight Tools
96299
. All rights reserved. No portion of this
®
.
®
Advertisement
Table of Contents
Related Manuals for Chicago Electric 96299
Summary of Contents for Chicago Electric 96299
-
Page 1: Operating Instructions
Harbor Freight Tools. For technical questions or replacement parts, please call 1-800-444-3353. Model 96299 . All rights reserved. No portion of this ® ®... -
Page 2: Product Specifications
Protect others in the work area from debris such as chips and sparks. Provide barriers or shields as needed. For technical questions, please call 1-800-444-3353. SKU 96299 1.3Ah Battery 5-7 Hours, after initial charge 120V ~60Hz 3/8”... -
Page 3: Electrical Safety
Do not use the power tool if the trigger does not operate it. be controlled with the trigger is dangerous and must be replaced. For technical questions, please call 1-800-444-3353. SKU 96299 Electrical Safety Personal Safety Tool Use and Care... -
Page 4: Specific Safety Rules
Always keep the work area free of ob- structions, grease, oil, trash, and other debris. Do not use the Cordless Drill/Driver in areas near flammable chemicals, dusts, and vapors. Do not use this product in a damp or wet location. - Page 5 Hold the tool by its insulated gripping surfaces when performing an opera- tion where the Cordless Drill/Driver may contact hidden wiring. Contact with a “live” wire will make exposed metal parts of the Cordless Drill/Driver “live” and shock the operator.
- Page 6 OSHA requirements and complies with the applicable standards of Underwriters Laboratories, Inc., the Canadian Standard Association, and the National Electrical Code. (See Figure B.) For technical questions, please call 1-800-444-3353. SKU 96299 GROUNDING WARNING! FIGURE B.
-
Page 7: Extension Cords
16.1 – 20.0 Chart A * Based on limiting the line voltage drop to five volts at 150% of the rated amperes. For technical questions, please call 1-800-444-3353. SKU 96299 ExTENSION CORDS (120 OR 240 VOLT) ExTENSION CORD LENGTH 50 Feet... - Page 8 If battery-powered device has been damaged, immediately stop use, unplug, and safely move away from flammable materials. Follow instructions for charging batter y. Do NOT charge longer than recommended. For technical questions, please call 1-800-444-3353. SKU 96299 SyMBOLOGy Double Insulated Canadian Standards Association Underwriters Laboratories, Inc.
- Page 9 The Battery Pack (19) requires charging before the initial use. The recommended initial charge time is twelve hours, prior to initial use of the Cordless Drill/Driver. Place the Charger on a solid surface such as a garage floor; never on anything flammable.
- Page 10 Warning! Never change Torque Setting while drill is still rotating, as this can damage the Cordless Drill/Driver. Decide on which setting to choose for application: For technical questions, please call 1-800-444-3353. SKU 96299 Gear Box with Torque Ring (2) Rotation Button (6)
- Page 11 The different sizes of screws pictured on the Ring are an indication of how much torque the Cordless Drill/Driver will apply to the bit before the clutch slips, allowing the bit to stop and helping to prevent damage to the screw, bit, or workpiece. The larger the screw, the more torque is applied before the clutch slips.
-
Page 12: Inspection, Maintenance, And Cleaning
After each use: With a soft brush or cloth, remove all dirt and debris from the Cordless Drill/Driver. Do not immerse the Cordless Drill/Driver in any liquids. When the battery needs to be replaced remember that the lithium battery in this tool must be recycled or disposed of properly. -
Page 13: Assembly Diagram
Right Body Screw Rotation Button Clear Soft Grip Right Plate Tube Black Wire Red Wire Trigger For technical questions, please call 1-800-444-3353. SKU 96299 PARTS LIST Part ASSEMBLy DIAGRAM Description Left Plate Left Body Black Wire Red Wire Bracket Contact Plate... -
Page 14: Limited 90 Day Warranty
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. For technical questions, please call 1-800-444-3353. SKU 96299 PAGE 14...
Need help?
Do you have a question about the 96299 and is the answer not in the manual?
Questions and answers