P Utting Into Operation; B Attery Charging - Barbieri Spectropad Series 2 Operating Manual

Barbieri Spectropad
2. p
uttIng Into operatIon
2.1 B
attery ChargIng
Page 8 - Operating Manual Spectropad Series 2
The instrument is switched on, by shortly pressing the On/Off button.
The main screen appears:
To switch off the device, select the "Switch off" button on the screen or
alternatively press the On/Off switch on the instrument.
Pressing the On/Off switch for more than 5 seconds will force the in-
strument to switch off in case it is in a blocked condition.
The instrument is equipped with a rechargeable battery. The battery
can be charged by connecting the power adapter to the instrument.
A LED near the power connector indicates the correct charging. When
instrument is switched on, the battery indicator in the status line indi-
cates additionally if battery is charging.
Charging is finished after approx. 4 hours charge time with power
adapter.
Note: The battery is charged also over the USB cable when connected,
but only when instrument is switched off. Charging time is approx. 20
hours over USB cable.