Barbieri Spectropad Series 2 Operating Manual page 32

Barbieri Spectropad
Page 32 - Operating Manual Spectropad Series 2
The Message "preparing Access Point" appears and the default instru-
ment IP address is indicated as soon as ready.
The instrument supports 2 connection modes:
- SpectroPad to WLan (Router mode)
- PC to SpectroPad (Access Point mode)
By default, the instrument is in Access Point mode which allows a PC
to directly connect to the instrument by using the IP-address indicated.
In this mode there is no encryption enabled.
When selecting the "SpectroPad to WLan" mode, the instrument lists
the available WLans:
Choose the desired WLan and press "Connect". The instrument will
then try to connect to the selected WLan. This operation might take
some time.