C Hart Measuring Mode - Barbieri Spectropad Series 2 Operating Manual

4. C
hart measurIng mode
Note: the selected direction is always indicated in the Statusbar. It can be modified by clicking on the
arrow icon in the Statusbar.
Note: to disable display of this message (disable Beginners-mode), click on the icon in the right
lower corner.
Barbieri Spectropad
The chart measuring mode is used to measure complete color charts.
Predefined job definition files which have been created with the Bar-
bieri Gateway software or 3rd party software are offered for selection
and can be measured:
Select the desired job and confirm with "Select".
Select the measuring direction to be used.
Operating Manual Spectropad Series 2 - Page 19