Eginner Ode Configuration - Barbieri Spectropad Series 2 Operating Manual

Barbieri Spectropad
When successfully connected, the new IP number and signal strength
are shown on the screen.
For secure connections the instrument supports the WEP, WPA and
WPA2 standard. If you choose a new WLan network the passphrase
must be inserted.
Please note: the instrument uses TCP/IP port 9760 to communicate
over the network with your software. Make sure this port is not blocked
by a firewall in your network.
7.2 B m
egInner ode ConfIguratIon
Switch on and off the beginner mode message boxes.
Operating Manual Spectropad Series 2 - Page 33