Measuring A Reference Strip - Barbieri Spectropad Series 2 Operating Manual

Barbieri Spectropad

Measuring a reference strip

Reference values can be supplied by a reference file or by saving a
measurement as reference.
In case of the sample job "DEMO_Printer1_Media1", you need to print
out a Barbieri DOC control strip on your printer and measure this as
your reference.
Measure the printed strip as described in chapter "chart measuring
mode".
when chart measurement is terminated, you can save the measure-
ment as reference with button "Save as Ref." or "Close" and discard
measurement.
When choosing "Edit" button from the job list in the "Select Job" win-
dow, the actual reference file is shown.
If requested, the reference file can be deleted and this allows to meas-
ure a new strip as reference strip.
Operating Manual Spectropad Series 2 - Page 23