Barbieri Spectropad Series 2 Operating Manual page 27

Note: when using the "aperture" as the positioning marker, a "measure" button will be shown and
when pressed, the measurement is taken immediately on the actual position of measuring head.
This mode is useful when measuring on large patches or on patches where movement of measuring
head is difficult.
Note: DOC mode is only available in Spectropad DOC.
Barbieri Spectropad
Move the measuring head so that it passes over the patch. The instru-
ment will measure the color on the previously indicated position.
The measured color will appear on the screen.
Multiple colors can be measured and scroll buttons allow scrolling
back and forward.
The measured color can be deleted by pressing
Pressing "Delta E"
ence color and allow indication of color difference (Delta E) against
this color.
Pressing "DOC" button will set the current color to the reference
color and allow indication of color difference and additionally indication
if within specified tolerance.
Operating Manual Spectropad Series 2 - Page 27
button will set the current color to the refer-