Troubleshooting - Command Communications ComSwitch 8500-t Operator's Manual

Troubleshooting

Why are fax calls being transferred to my telephone and/or answering machine?
Why can't I receive faxes when I'm away from the CS8500-t (when an answering machine is
connected to the CS8500-t)?
The LED doesn't light on the CS8500-t, what should I do?
CS8500-t Operator's Guide
See "Answering incoming calls" for transferring instructions.
Check the following settings and procedures:
Instruct callers to press
Set your fax to answer on the lowest number of rings.
Set your answering machine to answer on 2 - 4 rings.
Check your power connection.
If power is connected properly, make sure that you are using a 12 volt AC
power adapter.
Verify that the phone line is properly connected to the LINE IN port.
to send a fax.
18