Page 1
PNEUMATIC STAPLER 66874 SET UP AND OPERATING INSTRUCTIONS ® Distributed exclusively by Harbor Freight Tools 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com Read and understand tool labels and manual. Failure to follow warnings could result in DEATH or SERIOUS INJURY.
Keep bystanders, children, and minor or moderate injury. visitors away while operating the SKU 66874 For technical questions, please call 1-800-444-3353. Page 2...
Always wear eye protec- Do not use the tool if the Trigger tion. Wear ANSI-ap- does not turn the tool on or off. proved safety goggles. Any tool that cannot be controlled SKU 66874 For technical questions, please call 1-800-444-3353. Page 3...
Staples not identified for use with this tool by the tool manufacturer are able to result in a risk of injury to persons or tool damage when used in this tool. SKU 66874 For technical questions, please call 1-800-444-3353. Page 4...
13. The written approval of the tool man- operator and others in the work area. ufacturer must be obtained prior to making any modifications to the tool. SKU 66874 For technical questions, please call 1-800-444-3353. Page 5...
Page 6
To reduce the risk of 24. WARNING: Some dust created by vibration-related injury: power sanding, sawing, grinding, drill- SKU 66874 For technical questions, please call 1-800-444-3353. Page 6...
INSTRUCTIONS. Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual. SKU 66874 For technical questions, please call 1-800-444-3353. Page 7...
An in-line shut- regulator so that the air output is off valve is an important safety enough to properly power the tool, device because it controls the air SKU 66874 For technical questions, please call 1-800-444-3353. Page 8...
Disconnect the tool from the air sup- repaired. ply. Work Piece and Work Area Set Up Empty the magazine of fasteners. Designate a work area that is clean and well-lit. The work area must not SKU 66874 For technical questions, please call 1-800-444-3353. Page 9...
Slide the Driver Guide out as far as it will go. Insert Staples crown first into the bot- tom of the Magazine. Slide the Driver Guide back into the Magazine until it clicks into place. Rev 09f SKU 66874 For technical questions, please call 1-800-444-3353. Page 10...
Clean external surfaces of air occurs, have the problem the tool with clean, dry cloth. Then corrected before further use. store the tool indoors out of children’s reach. SKU 66874 For technical questions, please call 1-800-444-3353. Page 11...
If unable to clear jam using the meth- od prescribed above, the tool should be taken to a qualified service techni- cian for proper servicing. SKU 66874 For technical questions, please call 1-800-444-3353. Page 12...
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not avail- able individually as replacement parts. SKU 66874 For technical questions, please call 1-800-444-3353. Page 14...
Page 16
This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353 SKU 66874 For technical questions, please call 1-800-444-3353. Page 16...
Need help?
Do you have a question about the 66874 and is the answer not in the manual?
Questions and answers