Contractor series 1/2" crown air stapler (9 pages)
Summary of Contents for Central Pneumatic 65902
Page 1
Portable Soda blaSter 65902 66742 Set uP and oPerating inStructionS ® distributed exclusively by Harbor Freight tools 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com read this material before using this product. Failure to do so can result in serious injury.
Page 2
Keep bystanders, children, and minor or moderate injury. visitors away while operating the SKU 65902/66742 For technical questions, please call 1-800-444-3353. Page 2...
Wear heavy- switch to its off position before leav- duty work gloves during use. ing the work area. SKU 65902/66742 For technical questions, please call 1-800-444-3353. Page 3...
Page 4
No-load speed source that is capable of Revolutions or reciprocation per .../min exceeding 100 psi. Over minute pressurizing the Soda chart continued in next column. Blaster may cause burst- SKU 65902/66742 For technical questions, please call 1-800-444-3353. Page 4...
Remove this plug before set up. Attach an air hose to the compres- sor’s air outlet. Connect the air hose to the Male Coupler of the Soda reV 09e SKU 65902/66742 For technical questions, please call 1-800-444-3353. Page 7...
Page 9
(19) or Media Regulator Assembly (15). note: When setting up this product always use thread For SKU # 65902 pour up to 10 sealer tape at every fitting to pounds of media into the Storage assure leak free operation. Tank (1). For SKU # 66742 pour up...
Page 10
Attach the pressure line from the length to allow free movement while air compressor (not included) to the working. Male Coupler (3). SKU 65902/66742 For technical questions, please call 1-800-444-3353. Page 10...
Page 11
Spray the abrasive media onto the work material, moving the gun from To prevent accidents, turn off the side to side. Soda Blaster, detach the air sup- ply, safely discharge any residual air SKU 65902/66742 For technical questions, please call 1-800-444-3353. Page 11...
PreVent SeriouS injurY From Soda blaSter Failure: do not use damaged equipment. if abnormal noise, vibration, or leaking air occurs, have the problem corrected before further use. SKU 65902/66742 For technical questions, please call 1-800-444-3353. Page 12...
Damaged valve or housing. Replace damaged components. Dirty, worn or damaged valve. Clean or replace valve assembly. Follow all safety precautions whenever diagnosing or servicing the Soda blaster. disconnect air supply before service. SKU 65902/66742 For technical questions, please call 1-800-444-3353. Page 13...
NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. SKU 65902/66742 For technical questions, please call 1-800-444-3353. Page 14...
If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not avail- able individually as replacement parts. SKU 65902/66742 For technical questions, please call 1-800-444-3353. Page 16...