Mitsubishi Diamond Pro 750SB Service Manual page 60

4.1.5 DDC (Display Data Channel) Functions
VESA DDC 2B (EDID data only) , (Support 9pin-5V)
VESA DDC/CI
4.1.6 Preset Timing
Factory-presets : 14 signals (See 19. Timing sheet of ADJUSTMENT PROCEDURES for detail timing
User-presets : 10 (F.I.F.O)
Preset Timing Discrimination
Horizontal Frequency
Vertical Frequency
Sync Signal Polarity
* The monitor is able to discriminate input signals by at least one of above parameters.
parameters.)
(Signal No. 2 to No.8, No.10 to No.13, No.16 to No.18 are adjustment Signals.)
≥ 1kHz
≥ 1Hz
H or V-sync signal polarity is different
5-17