Epson PC AX Technical Manual page 263

REV.A
DIAGRAKS AND REFERENCE MATERIALS
+-----------------------------------------------------------------+
I I
I I
: HARD DISK DRIVE(S) AND CONTROLLER CHECK :
: Error code
=
1706 :
: ERROR CORRECTION ERROR :
I I
I I
+--------_._-------------------------------------------------------+
5) READ/VERIFY Check
Drive selection is identical to Item
1).
In the READ/VERIFY
check, all heads from the highest cylinder to Cylinder No. 0 are
read in track units, and the read statuses that detected bad sector
or any other READ error are preserved.
+-----------------------------------------------------------------+
I I
I I
: READ, VERIFY CHECK :
I I
I I
: Current cylinder is xxx :
I I
I I
+-----------------------------------------------------------------+
(The xxx represents the number of the cylinder being read.)
When the reading of all cylinders up to Cylinder No. 0 is
completed, the results are displayed:
+-----------------------------------------------------------------+
I I
I I
: READ, VERIFY CHECK :
I I
I I
: BAD TRACKS •.•...•.•..••...•. xxxx :
: READ ERROR TRACKS ..•.••.••.. yyyy :
: GOOD TRACKS ..•••••..•••••••• zzz z :
I I
I I
: Press ENTER to return to the menu :
I I
I I
+-----------------------------------------------------------------+
(xxxx represents the total number of bad tracks, yyyy represents
the total number of tracks detecting a READ error, zzzz represents
total number of normal tracks.)
6) Run All Above Checks
When "Run all above checks" is selected, the preceding checks
described in Items 1) to 5) are consecutively executed.
7-89