Epson PC AX Technical Manual page 162

DISASSEMBLY AND ASSEMBLY
5.1.15 ART-MT Circuit Board Removal
REV.A
1. Remove the upper ease.
2. Remove all optional eireuit boards.
3. Remove the
ANT-mt
board.
4. Remove the
ANTA
board.
5. Diseonneet the two eonneetors (A).
6. Remove the five serews (C) fastening the
ANT-MT
board (B) to the lower ease
and remove the
ANT-MT
board.
(C)
(B
FIGURE
5-1-8. ART-MT
CIRCUIT
BOARD REKOV
ALlREPLACEMENT
5.1.16 ART-MT Circuit Board Replacement
1. Replaee the
ANT-MT
board and fasten with the five serews (C).
2. Connect the two eonnectors (A).
3. Replaee the ANTA board.
4. Replaee the ANT-r~ board.
5. Replaee the optional eireuit boards.
6. Replaee the upper ease.
5-8