Interpreting The Charging Pocket Leds; Red Continuous - On Any Charge Pocket; Red Flashing - On Any Charge Pocket; Red Flashing - On All Charge Pockets - Honeywell MX7 Tecton User Manual

Interpreting the Charging Pocket LEDs

The status of the charge operation is indicated by the color of the LED for each charging pocket.

RED Continuous - on any charge pocket

Continuous red means the battery pack is charging.
l

RED FLASHING - on any charge pocket

Battery pack fault or failure.
l

RED FLASHING - on all charge pockets

Battery charger fault or failure.
l
Battery pack fault or failure or a battery charger timeout period expiration.
l

GREEN - on any charge pocket

Continuous green means the battery pack charge is complete - Battery is Ready.
l

YELLOW - on any charge pocket

Continuous yellow / amber means the battery pack temperature is out of range. The charging pocket is in standby mode
l
while the pocket waits for the battery pack to warm up or cool down.

NO LIGHT - on any charge pocket

No light on a charge pocket means there is no battery pack installed
l
or the battery pack in the pocket is not fully inserted
l
or a defective or damaged battery pack is installed
l
or the charger is defective or damaged. Refer to
l

NO LIGHT - on all charge pockets

No light means there is
l
charging bay.
no AC power available to the battery charger or there is power but there are no batteries in any
Battery Charger Help.
1-9