Chevrolet 1970 Owner's Manual page 34

Should it become necessary to make
this adjustment, see your Chevrolet
dealer. The indicator light will be on
when the radio is tuned to an FM
stereo station. Most broadcasts on such
stations will be in stereo.
To Tune Your Stereo Radio
• Tune radio to an FM Stereo station
Stereo Tape System
The optional Stereo Tape Player
provides prerecorded stereo programs
for your enjoyment.
To play, turn ignition switch to
"ON" or "ACC" position and insert
cartridge through tape door with label
side up and open end in first. Tape
will play through all four programs
in succession, then replay in same
sequence. Balancing the speakers is
not required as this adjustment has
been made at the factory. Should it
become necessary to make this ad-
justment, see your Chevrolet dealer.
1. Rotate Fader control until volume
from front and rear speakers
sounds equal.
(one which makes the indicator
light come on).
• Tune the lever behind the station
selector knob until volume from
front and rear speakers sounds
equal.
• Regulate volume and tone controls
as required .
2. Regulate volume control and tone
controls as desired.
3. To change program track, push in
volume control knob and release;
player will index to next track.
Push in the "eject" button to re-
move tape cartridge from player.
Cleaning and Care - Every 100 hours
of operation, or if tape slips and runs
slowly, the capstan (revolving metal
post), head and tape guide should be
cleaned with a cotton-tipped swab
moistened with alcohol (do not use
carbon tetrachloride). To clean the
capstan, trip the on-off switch at the
31
•
rear of the receptacle with your finger
and hold the swab against the rotating
capstan.
CAUTION: When tape player is not in use,
remove the cartridge and store it in
a
cool, dry place out
of
direct sunlight. If
the cartridge is not removed, the radio
may be inoperative and possible roller
damage to the tape unit could occur.