YOUR MIO LINK
LED
Activating Your Mio LINK
1. Remove your Mio LINK from the packaging.
2. Fasten the LINK onto your wrist.
3. Press and hold the button to activate Mio LINK. The LED will light up.
4. After a few seconds, the LED light will turn off.
5. Mio LINK is now activated and in standby mode.
Wearing Your Mio LINK
To accurately monitor your heart rate:
Fasten Mio LINK snugly on your wrist. The optical sensor on the back should make
•
good contact with your skin.
You should wear Mio LINK above, and not directly on top, of your wrist bone
•
If you have a smaller wrist, wear Mio LINK higher on your forearm.
•
If you use Mio LINK for biking, wear it higher on your forearm, since the bending of the
•
wrist will affect the heart rate reading.
If you often have cold hands or poor circulation, try exercising for a few minutes to
•
increase blood flow before you begin to track your heart rate.
Mio LINK User Guide
USB Dongle
Charging Pins
Button
Sensor
Lights
Optical
Sensor
04