im Vertrieb von
Communication and Control
command contains invalid parameters, it returns an error
response to the host.
E12 — Invalid port number
E13 — Invalid parameter
E14 — Not valid for this configuration
E17 — System timed out
E22 — Busy
E24 — Privilege violation
E25 — Device not present
E26 — Maximum number of connections exceeded
E27 — Invalid Event number
E28 — Bad Filename/File not found
References to errors (at command descriptions on the
following pages)
Commands that give E14 (Invalid Command for this
14
=
configuration) if sent to Extron product whose current
configuration does not support the command.
24
= Commands that give E24 (Privilege violation) if not
administrator level
27
= Commands that may give E27 (Invalid Event number)
28
= Commands that may give E28 (File not found)
www.camboard.de
4-22
IPL M PDP-ES • Communication and Control
CAMBOARD Electronics
Tel. 07131 911201
Fax 07131 911203
ce-info@camboard.de
IPL M PDP-ES • Communication and Control
4-23
Need help?
Do you have a question about the IPL M PDP-ES and is the answer not in the manual?