Table of Contents
Advertisement
Instructions
Line In 2
The 3.5mm input jack is ideal for connecting to the headphone output of an external audio
source using the 2m cable provided:
HEADPHONES
Important note:
With a jack plugged into LINE IN 2, LINE IN 1 is switched-off and no audio will be heard from this source.
The ANALOGUE INPUTS are automatically selected when Bluetooth device is connected and
playing and no Optical Digital Input signal is present. The Status LED will be GREEN when an
analogue input is in use.
Please note:
When connecting to a variable level source, such as a headphone output, better audio quality
will be achieved by having the source set at a higher volume level and the Q-BT3 at a lower
level than the other way around.
4. Subwoofer Out
Single RCA phono jack. Connect the 'Sub Out' to a Subwoofer Line Level Input if extended bass
response is desired.
5. Bluetooth Pair Button
The Q-BT3 has been designed to automatically search for, and PAIR with a device should no
other devices currently be PAIRED and in range. This Bluetooth Pair button is used to manually
drop the current connection and pair with a new device.
6. Power Switch
Turns the power to the Q-BT3 ON/OFF. Always turn the power OFF when making connections
to the Q-BT3 Rear Panel.
7. AC Input
Universal power connector. Automatically selects AC voltage for a given region. Connect to the
included AV Power Cord for your country.
8. Output Speaker Terminals
Connect the supplied speaker cable from the active right speaker output terminals to the
passive left speaker input terminals. Make sure to connect the WHITE STRIPE cable to the RED
positive terminal of each speaker, and the SOLID BLACK cable to the BLACK negative terminal
of each speaker.
3.5mm Jack Lead (included)
10
Hide quick links:
Advertisement
Table of Contents
