Clogs in the Attachment Tube Clogs in Entrance to Dust Bag Clogs in the Swivel Neck Trouble-Shooting Guide AUTOMATIC X Filter Bag Housing and Handle Schematic and Part Numbers X4 Base Schematic and Part Numbers X5 Base Schematic and Part Numbers Warranty...
22. Use only original SEBO replacement parts. it to a SEBO service center. 23. Do not use vacuum as a step. 6. Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp 24.
Typical vacuums perform poorly and usually do Liberation from Bagless! SEBO Bags are not last beyond two years. So, in the long run, SEBO vacuums Hygienic – The three-layer filter bag is an cost less money than the five to six other vacuums purchased integral part of SEBO’s filtration system...
1300 watt motor. OPTIONAL ATTACHMENTS, ACCESSORIES, BAGS & FILTERS SEBO filter bags can be purchased in boxes of ten (or some- In addition to the standard on-board tools, a variety of times eight) and filters are sold separately. Also, bags and optional attachments are available.
If damage occurs, stop using the vacuum cleaner immediately! The standard brush roller on your SEBO vacuum is appropriate for most types of floor surfaces. However, a soft-bristle brush roller (X4 part # 5010GE or X5 part # 5290GE) that is designed for use on sensitive looped-pile carpets and/or hard floors is available for an additional charge.
Ensure that no children or pets can come into contact with the spin- ning brush roller. To vacuum walls, under beds, or higher-reach areas, etc., the SEBO AUTOMATIC X can be fitted with an additional straight tube (45) and the wall and floor brush (41).
VACUUM MAINTENANCE Always unplug vacuum from outlet before dismantling any part of machine! Changing the Dust Bag - Figure 10 To change the dust bag, pull the cover release flap forward (#5 on page 6) and lift the cover (7) from the dust bag housing.
CLOG REMOVAL Always unplug vacuum from outlet before removing any clogs! Clogs in the Airflow Pathway - Figure 15 Most clogs can be removed by accessing the airflow pathway via the orange colored access door (38) located on the underside of the power head. However, other clogs may only be removed by accessing the airflow pathway by disassembling the machine in the opposite sequence of the machine’s original assembly (see assembly, page 6).
TROUBLE-SHOOTING GUIDE Always unplug vacuum from outlet before dismantling any part of the machine! PROBLEM REASON SOLUTION Does not turn on 1. Handle not fully inserted into the bag 1. Release handle catch, push handle housing, causing a faulty connection. down, close handle catch.
AUTOMATIC X4 SCHEMATIC AND PARTS LIST Power Head #9501AM X4 Onyx/Silver #9574AM X4 Spring Green #9570AM X4 White/Gray Machine #9558AM X4 Red/Gray #9577AM X4 Blue/Yellow Pos. Part # Description #9570AM X4 White/Gray 5780AM Power head cover, complete - white/dark gray 5712GW Exhaust filter catch - white 5143...
AUTOMATIC X5 SCHEMATIC AND PARTS LIST Power Head #9580AM X5 White/Gray #9580AM X5 White/Gray Machine #9587AM X5 Blue/Yellow Pos. Part # Description 5790AM Power head cover, complete - white/dark gray 5712GW Exhaust filter catch - white 5143 Exhaust filter 5711GW Exhaust filter cover - white 5729UL Swivel neck assembly...
To locate an authorized SEBO dealer in your area, or to with your new SEBO vacuum cleaner. You may also reg- register a warranty claim in the United States of ister on our website at www.sebo.us.
Need help?
Do you have a question about the Automatic X and is the answer not in the manual?
Questions and answers