To contact SEBO in Canada: SEBO America, LLC SEBO Canada Telephone: (800) 334-6614 Telephone: (800) 661-8687 Fax: (303) 792-9196 Fax: (800) 270-4807 Website: www.sebo.us Website: www.sebocanada.ca For Warranty coverage information please refer to your Warranty Card included with your SEBO vacuum cleaner.
22. Use only original SEBO replacement parts. it to a SEBO service center. 23. Do not use vacuum as a step. 6. Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp 24.
Many optional accessories are also BRUSH” light will illuminate (after a 10 second delay) to notify the available. The filter bag is also SEBO’s largest, with a dirt user that the brush roller is too worn and, therefore, should be capacity of 1.4 gallons.
HEPA filters. Changing Bags is Easy and Clean – SEBO filter bags can be changed in just a few seconds, and a hygiene cap keeps dust sealed inside during removal and disposal.
Another popular attachment is the hand-held turbo brush for attachments are available. The nine-foot extension hose removing pet hair from upholstery. SEBO Ultra filter bags can be (extends suction hoses) and the 22-inch extension wand (extends purchased in boxes of eight and filters are sold separately. SEBO...
Page 8
When possible, consult the materials supplied by your floor’s manufacturer for information on proper upkeep and cleaning. To ensure that your new SEBO vacuum cleaner is compatible with your floor, please test the vacuum cleaner on each type of flooring surface in a small inconspicuous area to determine if any damage occurs.
Page 9
Ensure that no children or pets can come into contact with the spinning brush roller. To vacuum walls, under beds, or higher-reach areas, etc., the SEBO AUTOMATIC X can be fitted with an optional straight tube (33) and the optional wall and floor brush (34).
(7) and lift the front cover (8) from the bag housing. The cover release flap must remain in a for- ward “pulled-out” position to change filter bags and SEBO Ultra lock them into place. Squeeze the clamps on both Figure 13...
CLOG REMOVAL Always unplug vacuum from outlet before removing any clogs! Clogs in the Airflow Pathway - Figure 19 Most clogs can be removed by accessing the airflow pathway via the orange colored access door (48) located on the underside of the power head. However, other clogs may only be removed by accessing the airflow pathway by disassembling the machine in the opposite sequence of the machine’s original assembly (see assembly, page 6).
TROUBLE-SHOOTING GUIDE Always unplug vacuum from outlet before dismantling any part of the machine! PROBLEM REASON SOLUTION Does not turn on 1. Handle not fully inserted into the bag 1. Release handle catch, push handle housing, causing a faulty connection. down, close handle catch.
Page 13
AUTOMATIC X7 | X7 PREMIUM | X8 SCHEMATIC AND PARTS LIST Bag Housing and Handle #91542AM X7 Premium Arctic White (white/gray black) #91503AM X7 Red (dark red/silver) #91543AM X7 Premium Graphite (gray black/silver) #91566AM X8 Blue (dark blue/silver) #91542AM X7 Premium Arctic White Machine #91540AM X7 Premium PET Black (black/silver) Pos.
Page 14
AUTOMATIC X7 SCHEMATIC AND PARTS LIST Power Head #91503AM X7 Red (dark red/silver) #91503AM X7 Red Machine Pos. Part # Description 52136DRSE Power head cover, cpl., dark red/silver 52038ER Exhaust filter 52029DR Exhaust filter cover, cpl., dark red 52018ER Swivel neck support r. h. 5101 Swivel neck bearing r.
Page 15
AUTOMATIC X7 PREMIUM SCHEMATIC AND PARTS LIST Power Head #91542AM X7 Premium Arctic White (white/gray) #91543AM X7 Premium Graphite (gray black/silver) #91542AM Premium Arctic White Machine #91540AM X7 Premium PET Black (black/silver) Pos. Part # Description 52126WEAM Power head cover, cpl. white/silver 52038ER Exhaust filter 52029WE...
Page 16
AUTOMATIC X8 SCHEMATIC AND PARTS LIST Power Head #91566AM X8 Blue (dark blue/silver) #91566AM X8 Blue Machine Pos. Part # Description 52122DBSE Power head cover, cpl., dark blue/silver 52038ER Exhaust filter 52029DB Exhaust filter cover, cpl., dark blue 52018ER Swivel neck support r. h. 5101 Swivel neck bearing r.
Need help?
Do you have a question about the AUTOMATIC X Series and is the answer not in the manual?
Questions and answers