Cisco 12000 Series Replacement Instructions Manual page 28

Removing and Installing Line Card Memory
Figure 12
Figure 13
Handle the edges of the SODIMM only. Do not touch the integrated circuit devices on the SODIMM,
Caution
the metal traces, or fingers, along the edge of the SODIMM, or the pins in the SODIMM socket.
As the SODIMM is released, it positions itself at a 45-degree angle. Gently pull the SODIMM out of the
Step 6
socket. Continue to keep the module in a 45-degree angle until it is completely removed from the socket
guides. (See
Caution On ATM ISE line cards, take care that the SODIMM being removed from DIMM1 does not touch the
SODIMM module in DIMM0 as it is released.
Cisco 12000 Series Router Memory Replacement Instructions
28
Moving the Latch Away from the SODIMM
Moving the Latch Away from the SODIMM (Alternate Latch Type)
Figure 14b.)
78-4338-16