Korg M1 Owner's Manual page 65

Data copied to the clipboard can be pasted into the
browser or a timbre or track. If you're running more
than one instance of the M1 software synthesizer, you
can copy and paste between different instances of the
M1.
Clear
Clears the settings of the program. No program will be used,
and no sound will be produced.
Initialize
Initializes the settings of the program. Multisound card
number 1-00 will be loaded into Oscillator 1. Execute this
command if you want to create a sound from scratch.
"OUT/OUT AB, OUT CD" parameter is not Initial-
ized.
Apply Performance
The performance parameter settings (☞ "PERFORMANCE
page" on page 25) will be applied to the program. When you
execute this command, the performance parameters will be
reset to 0.
PROGRAM Select ............................................... [BROWSER]
To select a program, use the browser that appears when you
execute the menu command "Load" or when you click the
[BROWSER] switch. (☞ "The Browser" on page 16)
You can also select the program, click the name and drag
up/down or use the up/down/left/right cursor keys of
your computer.
"IFX" (☞ "IFX" on page 22) is automatically turned on
when you select a program.
LEVEL..................................................................... [00...99]
Specifies the output level of the program.
PAN ......................................................... [L50...C00...R50]
Specifies the pan of the program.
If DRUMS is specified as the oscillator mode (☞ "OSC
MODE" on page 35) in the program used by this tim-
bre, the "PAN" field will not appear. Use the "PAN"
setting (☞p.40) in the DRUM KIT EDIT section of the
OSC page to specify the pan of each sound in the drum
kit.
OUT .......................................................... [–, 1+2...15+16]
Selects the output destination of the program.
If DRUMS is specified as the oscillator mode (☞ "OSC
MODE" on page 35) in the program used by this timbre,
OUT AB or OUT CD can be selected as the bus to which the
output will be sent.
In the stand-alone version, nothing will be output if
you set this to other than 1+2.
Program mode
61