Track Parameter - Korg M1 Owner's Manual

Legacy collection
Hide thumbs Also See for M1:
Table of Contents

Advertisement

Track Parameter

Here you can choose the program used by each track, and
set the output level, pan, and output destination of each
track.
MIDI Indicator
Track Select
Track Select................................................................ [1...8]
This selects the track. To select a track, click the track num-
ber or the bar shown at either edge of the parameter area.
When you click the on-screen keyboard or drag the pitch
bend wheel or modulation wheel to operate them, MIDI
messages will be transmitted on the MIDI channel of the
Menu Commands
track you've selected here. If you're controlling the M1 soft-
ware synthesizer from an external MIDI device, you won't
hear anything unless the MIDI channel of your external
MIDI device matches the MIDI channel of the track you've
selected here. The same applies to the pitch bend wheel and
modulation wheel.
The editing area at the right will show the parameters
(selected by the [Page Select] switches) of the program used
by this track, allowing you to edit them.
MIDI Indicator (Track indicator)
When a track receives MIDI messages from the on-screen
keyboard or pitch bend wheel etc., or from an external MIDI
device, the number of that track (i.e., the track of the match-
ing channel) will light. However, this indicator will not light
in response to incoming MIDI realtime messages.
SOLO ................................................................... [OFF, ON]
Only tracks for which this is on will play.
MUTE.................................................................... [OFF, ON]
Tracks for which this is off will not play.
IFX ....................................................................... [OFF, ON]
Switches the insert effect section on/off.
OFF (dark): The insert effect section is bypassed.
ON (lit): The insert effect section is active.
Multi mode
53

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents