Cleaning And Replacing Ear Tips; Removing And Changing Ear Tips - RBH Sound EP-SB User Manual

CLEANING AND REPLACING EAR TIPS

Over time the silicone ear tips may lose their elasticity and the Comply™
foam tips may break down. The life of the tips depends on frequency of use
and type of activity. Body oils and salt composition are different among
people and some may cause faster deterioration. You should replace the ear
tips to get back to the earphones' original performance level.
A few other suggestions:
1. Remove the ear tip from the earphone (instructions below). If using
the Comply™ Foam Tips, simply discard and replace with new tips. Go
to http://www.complyfoam.com/rbh/. If using a silicone tip, wash with
mild soap and dry thoroughly.
2. Clean the earphone nozzle with a damp soft cloth or an antiseptic
cloth, then dry thoroughly.
3. Be sure that there is no earwax or other object plugging the nozzle
that could prevent sound from coming through.

REMOVING AND CHANGING EAR TIPS

Grasp the body of the earphone and
gently twist and pull the tip to
remove it. DO NOT hold or pull on
cable while removing tip, see
illustration. Replace by sliding the
back end of the tip nozzle onto the
earphone stem/nozzle and push on
until it slides into place. For Comply™
Foam Tips, visit http://www.complyfoam.com/rbh/ to purchase new tips.
Recommended replacement is after three months of regular use.
EP-SB Bluetooth Stereo Earphones 10 User's Manual