Table of Contents
Advertisement
PAIRING/CONNECTING THE EARPHONES (CONTINUED)
Pairing earphones with multiple devices via Bluetooth
The earphones can be connected with two Bluetooth cell phones at the
same time.
1. Pair the earphones with device one, then turn off the earphones.
2. Turn on the earphones, press and hold
red and blue LED flash alternately, this indicates the earphones are in
paring mode.
3. Pair earphones with device two.
4. Operate device one to connect with earphones. The earphones should
now be connected with both devices.
NOTE: The multiple-pair function is turned off in factory default settings,
to turn on this function follow the steps below:
Turn ON: Press and hold
•
connected device), and release it until you hear four rising tones.
Turn OFF: Press and hold
•
connected device), and release it until you hear four falling tones.
•
To improve the connection ability of the earphones, we suggest you
turn off the multiple-pair function when you're only connecting with
one cell phone.
EP-SB Bluetooth Stereo Earphones
and
button under standby mode (not
and
button under standby mode (not
9
about 8 seconds until the
User's Manual
Advertisement
Table of Contents
