Pairing/Connecting The Earphones; Pairing Earphones With Cell Phone Via Bluetooth - RBH Sound EP-SB User Manual

WEARING THE EARPHONES (CONTINUED)
3. (Optional) Set up the cord management clips as shown in the illustra-
tion below to keep the cord from interfering with your activity.

PAIRING/CONNECTING THE EARPHONES

Pairing earphones with cell phone via Bluetooth

Prior to using the earphones for the first time, you have to pair it with a
Bluetooth-enabled device such as a cell phone. The pairing procedures will
vary depending on the model of cell phone or device. Please refer to your
cell phone's User Manual for further information about pairing procedures.
1. Keep your earphones turned off and within reach of the cell phone or
Bluetooth device.
2. Press and hold
alternately, this will put the earphones into the pairing mode.
3. Activate your cell phone or Bluetooth device's Bluetooth function and
search for Bluetooth devices within range, select "RBH EP-SB" from the
list of devices shown (enter password "0000" if prompted).
4. After successfully pairing the earphones and cell phone, the blue LED
light on the earphones will flash twice every four seconds.
NOTE: Pairing mode will last about two minutes, then the earphones will go
back into standby mode if the pairing failed.
EP-SB Bluetooth Stereo Earphones
about 8 seconds until the red and blue LED flash
7 User's Manual