Table of Contents
Advertisement
PAIRING/CONNECTING THE EARPHONES (CONTINUED)
If the pairing is not successful, turn the earphones off and repeat the last
four steps on page 6.
Once the earphones have successfully paired, each time the earphones are
turned on, they will automatically connect to the last connected device.
The earphones can remember up to eight paired devices. When the number
of paired devices exceeds eight, the first one will be replaced.
Pairing earphones with a Bluetooth cell phone via NFC
Near Field Communications (NFC) is a contactless, Wi-Fi-like
type technology incorporated into many smartphones and other
devices. NFC is a short-range, low power wireless link evolved from
radio-frequency identification (RFID) technology, allowing the
transfer of small amounts of data between two devices held
a few centimeters from each other.
The EP-SB supports NFC technology; it can quickly
connect with a Bluetooth cell phone via NFC.
1. Turn on the earphones.
NOTE: The earphones DO NOT
need to be in pairing mode.
2. Activate the Bluetooth and NFC
function of the cell phone.
3. To pair and connect with a cell phone, hold the cell
phone within the NFC area of the earphones (within one
centimeter) until the red and blue LED of earphones flash alternately
(first pairing time may be three seconds), as shown in the illustration.
4. To disconnect, hold the cell phone and the earphones within one
centimeter of the NFC area.
EP-SB Bluetooth Stereo Earphones
8
User's Manual
Advertisement
Table of Contents
