Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for RBH Sound HP-1B
Summary of Contents for RBH Sound HP-1B
- Page 1 HP-1B ® Bluetooth Stereo Headphones U S E R ’ S M A N U A L...
- Page 2 THIS PAGE WAS LEFT BLANK INTENTIONALLY...
-
Page 3: Important Safety Information
INTRODUCTION Thank you for choosing RBH headphones. We are confident you will enjoy their ability to engage you with music as much as our speakers do. Please take a few minutes to read through this manual so you can extract the best performance from these headphones. - Page 4 FEATURES These RBH headphones have been designed with you in mind. The result is a set of headphones which deliver a wide sound stage free from outside noise. These powerful and stylish headphones come with a protective carrying case, user’s manual, micro USB charging cable, charger, 1/8-inch to 1/4-inch adapter plug, 3.5mm audio cable with controller/microphone and a non-controller cable to enjoy best sound possible.
-
Page 5: General Functions
GENERAL FUNCTIONS Operation LED Status Power On Blue LED flashes two times Power Off Red LED flashes two times Pairing Red LED and Blue LED flashes alternately Standby Blue LED flashes three times in five seconds Incoming Call Blue LED flashes continuous Low Battery Red LED flashes two times every two seconds Charging... - Page 6 BASIC BUTTON OPERATIONS (continued) Call mute function: Press the “volume down” button for two seconds and call will be muted. Press the “volume down” button again for two seconds and call will resume. Access Voice Control via Siri on iPhone or Google on Android devices: In standby mode (when music has been paused) double click the volume down button.
- Page 7 Activate the Bluetooth device and search for the headphones, from ® the list found on the Bluetooth device select “RBH HP-1B” to connect. ® Follow the instructions to enter “0000” as PIN if the Bluetooth device asks for one. Headphones are now ready for listening or making phone calls.
-
Page 8: Charging The Headphones
CHARGING THE HEADPHONES Your headphones come with a built-in rechargeable battery. Prior to using the headphones, it is recommended the battery be fully charged for the first use; this may take up to two hours. The red LED light will display while charging, when completely charged the blue LED light will be displayed. -
Page 9: Specifications
SPECIFICATIONS Model: HP-1B Bluetooth Version: Bluetooth Profiles: A2DP/AVRCP/HSP/HFP Operating Distance: 33 feet (10 meters) Charging Time: Approximately 2 Hours Impedance: 32 Ohms Sound Pressure Level: 118dB (±3dB) Frequency Response: 10Hz-22KHz Music Play Time: Approximately 14 Hours Talk Time: Approximately 14 Hours... -
Page 10: Warranty Registration
2 years for the hardware (excluding replaceable ear pads and battery), and 1 year on the battery from the original date of purchase. This warranty is provided by RBH Sound or the authorized RBH Sound dealer where the headphones were purchased. A valid purchase receipt is required for warranty repair on all RBH Sound headphones. - Page 11 THIS PAGE WAS LEFT BLANK INTENTIONALLY...
- Page 12 Bluetooth® is a registered trademark of Bluetooth® SIG. It is RBH Sound policy to continuously incorporate improvements into products; all specifications are © subject to change without notice. Copyright...