Technical Support - LSI MegaRAID SATA 150 User Manual

1.1.6

Technical Support

1.2 SATA150 Storage Adapter Characteristics
For answers to your technical support questions, or to obtain a driver for
an operating system other than the ones listed above, contact the LSI
Logic Technical Support team at:
•
support@lsil.com
•
1-678-728-1250 or 800-633-4545 option #3
•
http://www.lsilogic.com
In Europe, you can contact the LSI Logic Technical Support team at:
•
eurosupport@lsil.com
•
+44.1344.413.441 (English) or +49.89.45833.338 (Deutsch)
All models of the SATA150 storage adapter support these aspects of the
Serial ATA and PCI specifications:
•
Serial ATA, Revision 1.0, specification:
– 150 Mbytes/s bus speed
– Theoretical 1.5 Gbits/s data transfer rate
– Use a low-cost 7-pin connector with thin, flexible cables
– Use low voltage signaling levels to reduce current draw, EM
emission, and signal switching time
•
PCI Specification, Version 2.2:
– Backward compatible with previous implementations of the PCI
specification
– SATA150-6 and SATA150-4 boards conform to half-size PCI form
factor. SATA150-2 board conforms to low-profile PCI form factor.
All models of the SATA150 storage adapter support online array
expansion and hot swapping. These adapters all support some
SATA150 Storage Adapter Characteristics
Copyright © 2002–2004 by LSI Logic Corporation. All rights reserved.
1-5