PDT 8100 Series Product Reference Guide
Creating the Script for the Hex Image
On start-up, TCM displays the screen shown on page 12-2, with the Script1 window and
File Explorer window pointing to the SYMSDK\SCRIPTS directory and the SDK7X00
directory. The Script1 Window directory pane displays three volumes: Volume1, Volume2,
and Volume3. Depending on the type of flash chip you have, the number of volumes may
change. Files can be added to each of the volumes.
•
Create a new script file or open an existing script
•
Drag and drop existing files and directories to that script
•
Set the script parameters
•
Save the script
•
Review and modify the script.
Each process is described in the sections that follow.
Open a New or Existing Script
Scripts are created in the Script Window.
To open a new script:
•
Choose New from the File Menu, OR
•
Click on
To open an existing script (e.g., a standard script provided in the SDK):
•
Choose Open from the File Menu and select the script file name, OR
•
Click on
•
Double click on an existing script in the Script Browser window.
Note: If you open and make changes to an existing script, saving the
changes writes over the existing script. If you wish to use an original
or Symbol-supplied standard script as a base and save the changes
in a new script, use Save As instead of Save after making the
changes.
12-6
from the tool bar.
from the toolbar and select the script file name, OR