Installing The Internal Dual Sd Module - Dell Precision Rack 7910 Owner's Manual

5. SD card slot 1
The following table describes the IDSDM indicator codes.
Convention
A
B
C
D
E
Follow the procedure listed in
To see a video on how to remove & install the internal dual SD module and SD cards, scan this QR code,
or click here: http://www.Dell.com/QRL/Workstation/R7910/IDSM

Installing the internal dual SD module

1. Ensure that you read the
2. Follow the procedure listed in
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Locate the IDSDM connector on the system board.
2. Align the connectors on the system board and the dual SD module.
3. Push the dual SD module until it is firmly seated on the system board.
1. Install the SD vFlash media card(s).
2. Follow the procedure listed in
To see a video on how to remove & install the internal dual SD module and SD cards, scan this QR code,
or click here: http://www.Dell.com/QRL/Workstation/R7910/IDSM
IDSDM indicator code
Green
Flashing green
Flashing amber
Amber
Not lit
After working inside your
Safety instructions.
Before working inside your
After working inside your
6. IDSDM connector
Condition
Indicates that the card is online
Indicates rebuild or activity
Indicates card mismatch or that the card has
failed
Indicates that the card is offline, has failed, or is
write protected
Indicates that the card is missing or is booting
system.
system.
system.
69