4.
Press the battery into the connector until it snaps into place.
Figure 42. Installing the system battery
1.
system battery
1.
Install the cooling shroud.
2.
Follow the procedure listed in
3.
While booting, press <F2> to enter the System Setup and ensure the battery is operating properly.
4.
Enter the correct time and date in the System Setup Time and Date fields.
5.
Exit the System Setup.
To see a video on how to remove & install the system battery, scan this QR code, or click here:
www.Dell.com/QRL/Workstation/R7910/Battery
Hard-drive backplane
Depending on your system configuration:
Precision Rack
2.5 inch (x8) HHD/SSD
7910
86
After working inside your
2.
positive side of the battery connector
system.
http://