Selecting The Input Source; Labelling Input Sources - Sharp Aquos LC-40LE820M User Manual

Settings when using external devices

Selecting the input source

Can use for selecting the input source.
Using INPUT on the remote control unit or on the
TV
INPUT allows you to choose from the available input
sources.
Press INPUT on the remote control unit or on
1
the TV.
Press INPUT on the remote control unit or on
2
the TV to select the input source.
• The image and sound from the selected source
are output on the TV.
• You can also select the input source by pressing
a / b .

Labelling input sources

You can assign each input source a label as you
prefer.
Press INPUT to select the desired input
1
source.
Press MENU and the MENU screen displays.
2
Press c/d to select "Setup".
3
Press b/c/d to select "Option".
4
Press a / b to select "Terminal setting", and
5
then press ENTER.
Press a / b to select "Input label", and then
6
press ENTER.
Press a / b/c/d to select characters, and
7
then press ENTER.
• When you want to change the input label that you
have already assigned to the default name, press
c / d to move to "CLEAR" on the "Input label"
screen, and then press ENTER.
Repeat the above until the name is fully spelt
8
out, and then press MENU.
• The name can be 6 characters or less.
• When you want to set an input source name of
less than 6 characters, select"END".
Tool
:Enter
NOTE
• You cannot change labels if the input source is "TV".
Menu
CH list
:Exit
INPUT
INPUT1
Not switchable
INPUT2
Switchable
INPUT3
Switchable
INPUT4
Switchable
INPUT5
Switchable
DVD
Switchable
INPUT7
Switchable
USB
Switchable
Home network
Switchable
(Example)
41