Auto Setup; Quick Guide For Menu Operation; Selecting The Input Source - Sharp Aquos LC-50LE440M Operation Manual

Auto setup

Your television has an Automatic Tuning System which
makes tuning in your television easy. This Automatic
tuning System scans the entire reception range in your
area and automatically stores all available analogue
channels of suitable signal strength in the correct
order.
Preparation:
Press a (Power).
1
First Time Installation menu will appear.
Press c / d to select desired language.
First Time Installation
OSD Language
Auto Sleep
Enter
ENTER
2
If you cancel Auto Sleep (see page 12),
press a / b / c / d to select "Off". Then press
ENTER.
First Time Installation
OSD Language
Auto Sleep
Enter
ENTER
3
TV will search for TV-channels. Connect your
antenna now.
The tuning's progress will be displayed in percent
for confi rmation.
NOTE
• Please be patient - the Auto Tuning
process can take several minutes to
complete.
4
When the display reads 100%, normal TV-screen
will appear.
NOTE
• To cancel the auto tuning, press RETURN,
c
then press to select "Yes" during the process.
THE AUTOMATIC TUNING PROCESS WILL ONLY
START BY ITSELF THE FIRST TIME YOU SWITCH
THE SET ON. HOWEVER YOU CAN RESTART
THIS PROCESS VIA THE MENU SYSTEM (see
page 12).
• If you could not set up a correct language in this auto setup
process, you will be able to make your preferred language
selection as illustrated in page 8 (On-screen Language
Selection).
J3QQ1401C_EN.indd 7 J3QQ1401C_EN.indd 7
English
Off
Return
RETURN
English
Off
Return
RETURN
Quick guide for Menu
operation
Call Menu and for example: Select "Auto Tuning".
1
Press INPUT SELECT. Select TV, then press
ENTER. Press MENU.
2
Press c / d to select "CHANNEL", then press
b or ENTER.
Auto Tuning
CHANNEL ATV Manual Tuning
Programme Edit
3
Press a / b to select "Auto Tuning", then press
d or ENTER.
Auto Tuning
CHANNEL ATV Manual Tuning
Programme Edit
Press c / d to select "Yes" to confi rm or choose
the "No" to return to the menu screen.
... on the following pages the MENU can be called in
the same way as here.
4
Press RETURN to exit the menu.
NOTE
• The Menu screen disappears automatically after a defi ned
period of time with "OSD Timer". (see page 12)

Selecting the input source

Press INPUT SELECT to view a signal from another
device connected to your TV, such as a VCR or DVD
player. You can select each input source depending on
which input jacks you used to connect your devices.
To select the video input source, press
press ENTER.
a / b
, then
7
5/27/2013 2:03:22 PM 5/27/2013 2:03:22 PM