Shortcuts Instructions; Selecting The Input Source; Changing Channels / Volume - Sharp LC - 40N3000U User Manual

ENGLISH FRANÇAIS

Shortcuts Instructions

Selecting the input source

The first time you turn on your TV, you must select the TV signal source. Your TV stores this information, so you do not
need to change the TV signal source unless it changes. For example, you change from an outside antenna to cable TV.
To select the input source:
1. Turn on your TV, then press the [INPUT] button on the remote. The Input source menu opens.
2. Press [ ] button to highlight the input source, then press [ENTER] button.
/

Changing Channels / Volume

1. Press the [CH / V] on the remote control to change the channel.
2. Press the [VOL + / -] on the remote control to adjust the volume.
3. Press the numeric buttons on the remote control to display the corresponding channels.
NOTE
• Changing the channels can also be achieved by directly entering the channel number using the numeric keys on
the remote control. If you are entering a two or three digit channel number, the time between key presses should
be less than 3 seconds.
Channel search guide
When you select TV as input, if no TV channels were saved before, you will be prompted to do a channel search. Before
channel tuning could start, you must specify the Tuner Mode, Antenna or Cable. You can also go to Setting menu >
Channel to change the channel settings.
Shortcuts Instructions
Picture
Press to set the picture mode. It can be set as Vivid, Standard, Theater, Energy Savings or Custom. This mode achieves
a certain image display effect by setting the brightness, contrast and color etc.
Sound
Press to set the sound mode. It can be set as Standard, Theater, Music, Speech and Custom.
Mute
Press to turn the sound off, press this button again to turn the sound back on. This function is used to switch off sound
temporarily.
Sleep
It can set the TV to let it enter into the Standby state automatically. Press this button repeatedly to select the proper
sleeping clock mode, and the clock tells you the remaining time before the TV enters Standby state.
Display
Display the information banner. The information including channel number, channel name, current system time, tuner
mode, audio stream, video format, audio language, closed caption mode, parental locks rated, program details, etc.
ESPAÑOL
12