Reset; Information; Identifi Cation - Sharp Aquos LC-40LE820M User Manual

Appendix

Reset

If complex adjustments are made and the settings
cannot be restored to normal, you can reset the
settings to the factory preset values.
Press MENU and the MENU screen displays.
1
Press c/d to select "Setup".
2
Press b/c/d to select "View setting".
3
Press a / b to select "Reset", and then press
4
ENTER.
If you have already set the password, enter it
5
here.
• "Return to factory pre-settings" displays on the
screen.
Press c / d to select "Yes", and then press
6
ENTER.
• "Now, TV will restart automatically. OK?" displays
on the screen.
Press c / d to select "Yes", and then press
7
ENTER.
• "Now initialising..." displays on the screen and
blinks.
• After the reset has completed, the power shuts
off and then comes back on. The screen will have
returned to its original settings.
Press a / b to select the desired language
8
listed on the screen, and then press ENTER.
Press c / d to select "HOME" or "STORE",
and then press ENTER.
Setting the country.
9
Press a / b to select your country or area, and
then press ENTER.
• This setting screen only appears during the initial
auto installation.
The TV searches for, sort and stores all the
10
receivable TV stations according to their
settings and the connected antenna.
• To abort the initial auto installation in progress,
press RETURN.
NOTE
• When the TV is in "STORE" mode, repeat steps 1 to 8 to
change to "HOME" mode.
After factory presetting,
TV will restart automatically
Now initialising...

Information

Identifi cation
You can check the current version of the software on the
screen.
57