Displaying A Pc Image On The Screen; Selecting The Picture Size - Sharp Aquos LC-40LE820M User Manual

Connecting a PC

Displaying a PC image on the screen

Selecting the picture size

You can select the picture size as illustrated below.
Using Wide mode on the menu screen
Press MENU and the MENU screen displays.
1
Press c/d to select "Setup".
2
Press b/c/d to select "Option".
3
Press a / b to select "Option for view", and
4
then press ENTER.
Press a / b to select "Wide mode", and then
5
press ENTER.
a
Picture size images.
Input Signal
1024 g 768
Input Signal
1360 g 768
Normal
Keeps the original
For viewing wide
aspect ratio in a full
screen programs. The
screen display.
top and bottom of
the image is slightly
cropped.
Normal
Keeps the original
aspect ratio in a full
screen display.
Press WIDE.
1
• The WIDE MODE menu displays.
Press WIDE or a / b to select a desired item
2
on the menu.
NOTE
• Connect the PC before making adjustments.
• Selectable picture size may vary with input signal type.
Cinema Full
An image fully fi lls the
screen.
Full
An image fully fi lls the
screen.
WIDE MODE
Normal
Cinema
Full
Dot by Dot
or
WIDE MODE
Normal
Cinema
Full
or
WIDE MODE
Normal
Full
Dot by Dot
(Example)
Dot by Dot
Detects the resolution
of the signal and
displays an image
with the same number
of pixels on the
screen.
Dot by Dot
Detects the resolution
of the signal and
displays an image
with the same number
of pixels on the
screen.
45