Cleaning Cradle Connectors; Cleaning Frequency - Motorola MC 40 User Manual

Hide thumbs Also See for MC 40:
Table of Contents

Advertisement

8 - 4
MC40 User Guide
Use the cotton-tipped applicator dipped in alcohol to remove any grease and dirt near the connector area.
5.
Use a dry cotton-tipped applicator and repeat steps 3 through 5.
6.
CAUTION
Spray compressed air on the connector area by pointing the tube/nozzle about ½ inch away from the
7.
surface.
Inspect the area for any grease or dirt, repeat if required.
8.

Cleaning Cradle Connectors

To clean the connectors on a cradle:
Remove the DC power cable from the cradle.
1.
Dip the cotton portion of the cotton-tipped applicator in isopropyl alcohol.
2.
Rub the cotton portion of the cotton-tipped applicator along the pins of the connector. Slowly move the
3.
applicator back-and-forth from one side of the connector to the other. Do not leave any cotton residue on
the connector.
All sides of the connector should also be rubbed with the cotton-tipped applicator.
4.
CAUTION
Spray compressed air in the connector area by pointing the tube/nozzle about ½ inch away from the
5.
surface.
Remove any lint left by the cotton-tipped applicator.
6.
If grease and other dirt can be found on other areas of the cradle, use a lint-free cloth and alcohol to
7.
remove.
Allow at least 10 to 30 minutes (depending on ambient temperature and humidity) for the alcohol to air dry
8.
before applying power to cradle.
If the temperature is low and humidity is high, longer drying time is required. Warm temperature and dry
humidity requires less drying time.

Cleaning Frequency

The cleaning frequency is up to the customer's discretion due to the varied environments in which the mobile
devices are used. They may be cleaned as frequently as required, but it is advisable to clean the camera
window periodically when used in dirty environments to ensure optimum performance.
Do not point nozzle at yourself and others, ensure the nozzle or tube is away from your face.
Do not point nozzle at yourself and others, ensure the nozzle or tube is pointed away from
your face.

Advertisement

Table of Contents
loading

Table of Contents