China Rohs (Restriction Of Hazardous Substances) - Eizo SCD 19102 Instruction Manual

Appendix
A.6 China RoHS (Restriction of Hazardous Substances)
A.6

China RoHS (Restriction of Hazardous Substances)

LCD Display 液晶显示器
型号 Model: 6GF621#-2E$## (#=0..1 ; $=A..Z ; ##=00..99)
根据 SJ/T11364-2006《电子信息产品污染控制标识要求》特提供如下有关污染控制方面的信
息。
The following product pollution control information is provided according to SJ/T11364-2006
Marking for Control of Pollution caused by Electronic Information Products.
电子信息产品污染控制标志说明 Explanation of Pollution Control Label
94
该标志表明本产品含有超过中国标准 SJ/T11363- 2006《电子信息产品中有毒有
害物质的限量要求》中限量的有毒有害物质。标志中的数字为本产品的环保使用
期，表明本产品在正常使用的条件下，有毒有害物质不会发生外泄或突变，用户
使用本产品不会对环境造成严重污染或对其人身、财产造成严重损害的期限。单
位为年。
为保证所申明的环保使用期限，应按产品手册中所规定的环境条件和方法进行正
常使用，并严格遵守产品维修手册中规定的定期维修和保养要求。
产品中的消耗件和某些零部件可能有其单独的环保使用期限标志，并且其环保使
用期限有可能比整个产品本身的环保使用期限短。应到期按产品维修程序更换那
些消耗件和零部件，以保证所申明的整个产品的环保使用期限。
本产品在使用寿命结束时不可作为普通生活垃圾处理，应被单独收集妥善处理。
This symbol indicates the product contains hazardous materials in excess of
the limits established by the Chinese standard SJ/T11363-2006
for Concentration Limits for Certain Hazardous Substances in Electronic
Information Products
. The number in the symbol is the Environment-friendly
Use Period (EFUP), which indicates the period during which the toxic or
hazardous substances or elements contained in electronic information products
will not leak or mutate under normal operating conditions so that the use of
such electronic information products will not result in any severe environmental
pollution, any bodily injury or damage to any assets. The unit of the period is
"Year".
In order to maintain the declared EFUP, the product shall be operated normally
according to the instructions and environmental conditions as defined in the
product manual, and periodic maintenance schedules specified in Product
Maintenance Procedures shall be followed strictly.
Consumables or certain parts may have their own label with an EFUP value
less than the product. Periodic replacement of those consumables or parts to
maintain the declared EFUP shall be done in accordance with the Product
Maintenance Procedures.
This product must not be disposed of as unsorted municipal waste, and must
be collected separately and handled properly after decommissioning.
SCD 19102 / SMD 19102
Instruction Manual, 05/2008, A5E01588521A-002
Requirements