USE OF REMOTE CONTROL (Cont.)
RESET Function
When you press the recessed RESET button, all current
settings are cancelled and return to original factory settings.
• The clock time "12:00" will flash
• The mode displays "AUTO"
• The fan speed displays "AUTO"
• The temperature displays "24"
Note : You will need to reprogram the clock setting after
Pressing RESET button
LOCK Function
1. Use LOCK function when you want to prevent settings
from being changed accidentally.
2. When you press TEMP. ▲and ▼ buttons as the same
time, all current settings are locked in and the remote
control does not accept any operation except that of the
LOCK.
3. A LOCK symbol
hand sides of the remote control display when the LOCK
function is activated.
4. If you want to cancel LOCK function,
Press again TEMP. ▲and ▼ buttons as the same time.
will appear on the bottom right
F/C Function
Used to select / display temperature
settings in either " Celsius " or
Fahrenheit. Press this button to select
either the Celsius or Fahrenheit scale.
( 21 )