Table of Contents
Advertisement
USE OF REMOTE CONTROL (Cont.)
SWING FUNCTION
Press button SWING repeatedly to choose the following flap :
The louver will continuously swing up and down.
"Swing" always assures optimal even air distribution in the room.
• In Cool or Dry or Fan mode, the louver will swing in cooling range.
• In Heat mode, the louver will swing in heating range.
Note:
If you want to cancel swing function
SWING
Press button
AIR DIRECTION FUNCTION
The air conditioner automatically adjusts the vertical supply air
direction in accordance with the operating mode.
To set the vertical supply air direction (Up- Down)
• Perform this function while the unit is in operation.
• Keep pressing the AIR DIRECTION button on the remote
control to move the louver to the desired.
• In subsequent operations, the vertical air flow is automatically
set in the direction to which you adjusted the louver
by pressing the AIR DIRECTION button.
Left and Right Control
If you want to adjust the direction of the discharge air to left or right,
adjust the vertical louver with the handle after opening the flap.
NOTES:
• Please do not fix the flap for a long time, as this position minimizes
air circulation resulting in uneven room temperature.
• Please avoid the discharge air being directed towards the occupants for a long period of time.
• Do not adjust the flap by the hand during SWING operation because it may damage the air swing
function.
Swing Range
COOL
HEAT
at the desired flap position
( 15 )
Advertisement
Table of Contents
