Table of Contents
Advertisement
USE OF REMOTE CONTROL (Cont.)
TIMER OFF FUNCTION ( On → Stop Operation )
TIMER OFF function is useful when you want to stop automatically the air conditioner at a desired setting time
after you go to bed.
On
Set
Example :
To automatically stop the air conditioner at 23:00 in the evening
proceed with the following steps :
(1) Press
(2)
• Each time you press the button the time moves forward or
(3)
TO CANCEL TIMER ON FUNCTION
If you want to cancel TIMER OFF setting,
Press CANCEL button.
TO CHANGE TIMER ON SETTING
Perform steps 1, 2 and 3 to change TIMER OFF setting.
Stop
TIMER
button until the remote control display shows.
TIMER OFF indicator and the least setting time which is flashing
Now it is ready to reset the setting time of TIMER OFF function
To set the desired time, Press
unit the time 23:00 is displayed.
(Backward)
backward by 10 minutes depending on which one you
push. The time alters as quickly as you press the button.
After setting the time for TIMER ON function,
the TIMER led
will illuminate
on the display panel of the indoor unit is illuminated.
CAUTION
When you select the timer operation, the remote control
automatically transmits the timer signal to the indoor
unit at the specified time. Therefore, keep the remote
control in a location from which it can transmit the
signal to the indoor unit properly.
The effective operation time set by remote control is
limited in 24 hours.
( 18 )
TEMP.
button
(Forward)
Advertisement
Table of Contents
