Phone Setup - FLY MC100 User Manual

Keypad Tone: The keypad tone can be set to be Silent,
Tone or Click.
Volume: Adjust the volume of ring tones and keypad tones. Use the
Navigation keys (Up/Down) to adjust the volume in the volume
adjusting screen.
Alert Type: Set up the alert type for calls and messages. Options
available include Ring, Vibration, Vibra and Ring, and Vibra then
Ring.
Ring Type: Options available include Single, Repeat and Ascending.
Warning Tones: You may choose to turn on/off alert for warning,
error, network connection tone and call connection tone so as to
enable the tone prompt under corresponding circumstances.
Answer Mode: Set the answering mode.
Any Key
any key except for the End key and Right Soft Key.
There is also a Vibration Mode available in addition to the 6 modes
that are mentioned above. Hold down # key in idle interface and enter
Vibration Mode. Hold down # again to quit the Vibration mode and
return to the previous user profile. The alert settings in vibration mode
cannot be set or modified by the user.
Note: The other modes will be disabled after the earphone mode is
enabled.

4.6.2 Phone Setup

Time and Date
Use this menu to set the time and date of your mobile phone.
Set Time / Date: Input the current time and date with number keys.
Set Format: 12-hour format or 24-hour format are available for Time
display format.
Set Home City: Set the time zone where the user is located.
64
This key allows you to answer a call by pressing
: