To Do List; Stopwatch; Unit Converter - FLY MC100 User Manual

Table of Contents

Once Calculator is chosen, the operation screen appears on the

display.

Enter numbers to be calculated with number keys 0-9 and enter the

decimal point with the * key. Enter minus (-) with the # key.

Enter operators +, –, x, and ÷ with the Up/Down/Left/Right keys

respectively.

Press the Right soft key of Clear to remove the latest input or result;

press the Return key to quit the Calculator and the OK key to get the

calculation result.

Press the Navigation keys and OK to select the corresponding storage

key. "MR": re-use the stored data; "MC": clear the memory, "M+": add

the displayed number and the number in the memory; "M-": the

displayed number minus the number in the memory; The stored data

will be displayed in the [ ] of the calculator interface.

4.9.4 To Do List

Display all memos. When there is any memo, options available in this

menu include View, New, Edit, Delete, Delete All, Send Memo, etc.

Select Delete All to delete all memos.

Typical Stopwatch and nWay Stopwatch are available. In Typical

Stopwatch, you can choose between 2 timing modes: Split Timing

and Lap Timing. View Records can also be chosen.

With nWay Stopwatch, time on multiple ways can be recorded.

Tip: nWay Stopwatch can be reset by holding down the Left soft key

when the stopwatch is paused.

Choose Unit Converter to convert units of weight, length, area,

volume and temperature. The input/output accuracy of conversions is

digits

(including

decimal

points

but

excluding

minus

signs).Temperature conversion supports inputs higher than or equal to

-273.15°C (-459.67°F). Other conversions do not support minus inputs;

Enter minus (-) with the * key and the decimal point with the # key.

Table of Contents