Your Bt Digital Baby Monitor 300; Parent Unit - BT Baby Monitor 300 Setup & User Manual

Your BT Digital Baby Monitor 300

6 6

Parent unit

Lanyard attach point
You can loop a lanyard
(not supplied) through here.
Increase speaker volume.
Press to talk to your baby.
Decrease speaker volume.
Mute is switched on when -Vol
is pressed to the lowest level.
Steady red indicates that Mute
has been switched on.
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or visit bt.com/producthelp
2250 Baby Monitor 300 UG Iss2.[2].indd 6
+ Vol.
Talk
- Vol.
Microphone
Mute LED
Battery LED status indicator
(top of unit)
Red flashing light indicates the
batteries are low and need
re-charging. Solid red indicates
the Parent unit is charging.
Baby sound level LEDs
Indicates the level of received
sound. The LEDs will light up
progressively as the sound
increases. See page 13 for
further information.
Link status indicator
Steady green indicates that
the Baby and Parent units are
linked. Flashes green if not
linked for the first 30 seconds.
Flashes red if not linked for
longer than 30 seconds.
Also flashes green when the
Talk button is pressed on the
Parent unit to initiate parental
talk back.
Power on/off
Press and hold to switch the
power on or off.
10/04/2014 11:06