Your Bt Digital Baby Monitor 200; Parent Unit - BT 200 User Manual

Your BT Digital Baby Monitor 200

6 6

Parent unit

Lanyard attach point
You can loop a lanyard
(not supplied) through here.
Mute All (on top of unit)
Press to toggle the Parent unit
receive volume between on
Mute Low (on top of unit)
Press to toggle the Baby unit
microphone sensitivity between
normal and Mute Low.
Talk (on side of unit)
Press to talk to your baby.
Steady red indicates that Mute
All has been switched on.
Amber indicates that Mute Low
has been switched on.
Decrease speaker volume.
If you experience any problems, please call the Helpline on Freephone 0808 100 6554* or visit www.bt.com/producthelp
(top of unit)
and off.
Mute LED
- Vol.
Power on/off (on top of unit)
Press and hold to switch the
power on or off.
Baby sound level LEDs
Indicates the level of received
sound. The LEDs will light up
progressively as the sound
increases. See page 15 for
further information.
Low battery status indicator
Red light indicates the batteries
are low and need re-charging.
Link status indicator
Steady green indicates that
the Baby and Parent units are
linked. Flashes green if not
linked for the first 30 seconds.
Flashes red if not linked for
longer than 30 seconds.
Also flashes green when the
Talk button is pressed on the
Parent unit to initiate parental
talk back.
Microphone
+ Vol.
Increase speaker volume.